Panasonic WV-CS570/G Operating Instructions Manual

Contents

Panasonic WV-CS570/G Operating Instructions Manual Manual pdf 42 page image

Camera Setting To Display the Camera Setting MenuMove the cursor to CAMERA O, and press the CAM(SET) button. The camera setting menu appears. Camera Identification (CAMERA ID)1. Move the cursor to CAMERA ID, and select ON todisplay the camera identification with the joystick.2. Follow the steps below to edit the camera ID char-acters.2-1 Move the cursor to CAMERA ID and press theCAM (SET) button to display the character edit-ing menu.2-2 Move the cursor to the character you want to editor change with the joystick, and press the CAM(SET) button. The selected character appears inthe editing area.2-3 Repeat the steps above until all characters areedited.3. After editing the camera identification characters,follow the steps below to decide the position ofCAMERA ID.3-1 Move the cursor to POSI, and press the CAM(SET) button to display the ID position menu.** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPSPECIAL1CAMERARS485 SET UPPASSWORD LOCK OFFOFFOFF ATOFFAUTO PANON** SET UP **CAMERA IDALC/MANUALSHUTTERAGCSENS UPSYNCWHITE BALMOTION DETAF MODERET SPECIAL2ALCAUTOON(MID)OFFINTATW1OFFAUTO LOFF** SET UP **CAMERA IDALC/MANUALSHUTTERAGCSENS UPSYNCWHITE BALMOTION DETAF MODERET SPECIAL2ONALCAUTOON(MID)OFFINTATW1OFFAUTO L-42- Image Hold (IMAGE HOLD)The camera picture remains as a still image on themonitor screen until the camera reaches the presetposition. This function is useful for surveillance via localarea network.1. Move the cursor to IMAGE HOLD and select ON orOFF.ON: The last displayed still image is shown till thecamera finishes moving to a preset position.However, the still image may be distorted withthe effect of panning or tilting.OFF: The current image is being displayed while thecamera is moving to a preset position. Tilt Angle (TILT ANGLE 0 °/5 °)You can select the tilting range.1. Move the cursor to TILT ANGLE and select 0 ° or 5 °.0 °: The tilting range is between 0 ° and 180 °.5 °: The tilting range is between –5 ° and 185 °.Note:When 5 ° is selected in the WIDE mode, a sub-ject is not displayed on approximately the upperhalf of the screen or the screen becomes whitefor some subjects due to the AGC effect.** SPECIAL 1 **PRIVACY ZONE OFFPROPO.P/T ONAREA TITLE ON(USER)PATROL STOPALARM IN/OUTCLEANING OFFEL-ZOOM ONPRESET ALM OFFIMAGE HOLD ONTILT ANGLE 0°RET** SPECIAL 1 **PRIVACY ZONE OFFPROPO.P/T ONAREA TITLE ON(USER)PATROL STOPALARM IN/OUTCLEANING OFFEL-ZOOM ONPRESET ALM OFFIMAGE HOLD ONTILT ANGLE 0°RET