Panasonic WV-CU650 Operating Instructions Manual

Also see for WVCU650 - SYSTEM CONTROLLER ADDENDUM: Product catalog Specifications Addendum Operating instructions

Panasonic WV-CU650 Operating Instructions Manual Manual pdf 32 page image

32Note: If camera numbers are associated with unit num-bers, you can skip system unit selection. (Refer top. 66 Associating Camera Numbers with UnitNumbers.)2. Select a camera number by pressing the numeric but-tons. The entered number will appear on the LCD.Notes:• Refer to the operating instructions of system unit foravailable camera numbers.• You can also select cameras by pressing the + or –button. When pressing the + button, the monitor willdisplay the image of camera with the higher chan-nel number. When pressing the – button, the moni-tor will display the image of camera with the lowerchannel number.3. Press the CAM (SET) button. The system will becomeready for control. Then, the camera number will appearon the LCD, and the image of selected camera will bedisplayed on the active monitor.Note: If you have entered a wrong camera number(other than 1 to 999), “Invalid” will appear on theLCD. Then, the LCD will return to the status beforeselecting the camera.Signs displayed on the LCD“Seq”: This sign is displayed when a sequence is acti-vated.“Seq-P”: This sign is displayed when a sequence ispaused.“C-Pnnn*”: This sign is displayed when a camera posi-tion is selected. (Camera position is the combina-tion of camera number and preset position num-ber.) * nnn is a camera position number.■ Monitor SelectionWhen two or more monitors are connected to a system unit,you can select a desired monitor.When monitor selection is unavailable, “Mon- -“ appears onthe LCD. The selected system unit does not support moni-tor selection.1. Select a system unit (including a recorder) connectedto a monitor you wish to control. (Refer to p. 31 SystemUnit Selection.)2. Select the desired monitor number by pressing thenumeric buttons. The entered number will appear onthe LCD.Note: Refer to the operating instructions of system unitfor available monitor numbers.3. Press the MON (ESC) button. The monitor number willappear on the LCD. The system will become ready formonitor control.Note: If you have entered a wrong monitor number,“Invalid” will appear on the LCD. Then, the LCD willreturn to the status before the monitor selection.■ Camera SelectionWhen two or more cameras are connected to a system unit,you can select a desired camera. You will also performcamera selection when changing camera channels.1. Select a system unit and monitor connected to a cam-era you wish to control. (Refer to p. 31 System UnitSelection and Monitor Selection in this page.)Mon01 Cam016 HD316F1 F2 F3 F4Mon01 Cam001 ____16F1 F2 F3 F4Mon01 Cam016 ___16F1 F2 F3 F4Mon02 Cam016 HD316F1 F2 F3 F4InvalidMon02 Cam016 HD316Mon01 Cam016 HD316InvalidMon01 Cam016 HD316F1 F2 F3 F4Mon01 Cam001 HD316F1 F2 F3 F4