Panasonic WV-CU650 Operating Instructions Manual

Also see for WVCU650 - SYSTEM CONTROLLER ADDENDUM: Product catalog Specifications Addendum Operating instructions

Panasonic WV-CU650 Operating Instructions Manual Manual pdf 57 page image

57● Auto Pan Setup and ActivationYou will set up and activate the auto pan function. The cam-era can pan between the start and end points you will set.To set the start and end point of auto pan1. Display “Auto Pan” sub menu. (Refer to Step 1 to 4 of p.51 To Recall Menu Functions.)2. By moving the 3D joystick, move the camera to a pointyou wish to start auto pan.3. Press the F3 button.The start point of auto pan will be set.4. By moving the 3D joystick, move the camera to a pointyou wish to end auto pan.5. Press the F4 button.The end point of auto pan will be set.To activate auto panPress the F1 button.The auto pan will be activated, and the camera will panbetween the set.Notes:• When you press the F2 button, the auto pan directionwill be reversed.• Auto pan will be canceled when you pan or tilt theselected camera by moving the 3D joystick.■ Recorder Functions● Disk Selection(WJ-HD300 Series Only)You will specify a disk for search playback.1. Display “HD300 DiskSelect” sub menu. (Refer to Step 1to 4 of p. 51 To Recall Menu Functions.)2. Press one of the F1 to F4 buttons.The specified disk will be selected.Available buttons and functionsF1: Nr-ASpecifies the normal or event recording area forplayback.F2: Cp-ASpecifies the copy area for playback.F3: Cpy1This function is reserved for future use.F4: Cpy2This function is reserved for future use.3. When you specify a disk, the search list display willappear on the active monitor, and “Search Mode” menuwill appear on the LCD. Then, perform the search play-back operation. (Refer to p. 35 Search Playback.)● A-B Repeat Playback Setting(WJ-HD300 Series Only)You can playback the recorded images repeatedly byspecifying the start point (A) and end point (B).1. Display “HD300 A- B Repeat” sub menu. (Refer to Step1 to 4 of p. 51 To Recall Menu Functions.)2. During playback, press the F1 button at the point youwish to start playback. The playback start point (A) willbe set.Note: To cancel the start point, press the F4 button.3. Press the F2 button at the point you wish to end play-back. The playback end point (B) will be set, and therepeat playback will be performed between (A) and (B).HD300 A—B Repeat 202Start End CancelF1 F2 F3 F4Auto Pan Setup 105Play Rvrs Start EndF1 F2 F3 F4Search Mode HD300Thumb Text CopyHD300 DiskSelect 201Nr-A Cp-A Cpy1 Cpy2F1 F2 F3 F4