Panasonic WV-CU650 Operating Instructions Manual

Also see for WVCU650 - SYSTEM CONTROLLER ADDENDUM: Product catalog Specifications Addendum Operating instructions

Panasonic WV-CU650 Operating Instructions Manual Manual pdf 41 page image

41■ Preset Position ControlPreset position is the function to register camera monitoringpositions (preset positions) associated with position num-bers. By entering the position numbers, you can move cam-eras to the preset positions.Note: To activate this function, you need to register the pre-set positions of combination camera.1. Select a system unit, monitor, and desired camera.(Refer to p. 31 System Unit Selection, p. 32 MonitorSelection, and p. 32 Camera Selection.)2. Enter a preset position number by pressing the numericbuttons. The entered number will appear on the LCD.3. Press the PRESET/PGM PRESET button.The camera will move to the registered preset position,and the preset position image will be displayed on anactive monitor.To register preset positions1. Move the camera to a desired position by moving the3D joystick.2. Enter a preset position number you wish to register bypressing the numeric buttons.The entered number will appear on the LCD.3. Press the PRESET/PGM PRESET button while holdingdown the SHIFT button.The preset position will be registered, and “Memory”will appear on the LCD.Note: If the registration have failed, “Invalid” will appearon the LCD. (Example: When the selected cameradoes not support preset position control)■ Home Position ControlHome position is the default preset position. You can movethe camera to the home position only by pressing the PRE-SET/PGM PRESET button.Note: To activate this function, you need to register thehome position of combination camera. (Refer to theoperating instructions of combination camera.)1. Select a system unit, monitor, and desired camera.(Refer to p. 31 System Unit Selection, p. 32 MonitorSelection, and p. 32 Camera Selection.)2. Press the PRESET/PGM PRESET button. The camerawill move to the registered home position, and the homeposition image will be displayed on an active monitor.Note: You can also move the camera to the home posi-tion by pressing the button 0, and then the PRE-SET/PGM PRESET button.■ Camera Function ControlYou can recall the camera functions of combination cam-eras by entering the function number from this system con-troller. Refer to the operating instructions of combinationcamera for the association of camera numbers and func-tions.1. Select a desired combination camera. (Refer to p. 32Camera Selection.)2. Enter a camera function number by pressing thenumeric buttons. The entered number will appear onthe LCD.3. Press the CAM FUNC/SYS FUNC button.The associated camera function will be activated.Note: If you assign camera functions to the joystick functionbuttons (A, B, and top buttons), you can recall the cam-era functions by pressing these buttons. Refer to p. 47MENU FUNCTION DESCRIPTIONS for details.Mon02 Cam001 ____3F1 F2 F3 F4Mon02 Cam001 Pre03F1 F2 F3 F4Mon01 Cam001 ___12F1 F2 F3 F4Mon01 Cam001 Pre12MemoryMon01 Cam001 ____3F1 F2 F3 F4Mon01 Cam001 Pre12Invalid