Panasonic WV-CW504S Operating Instructions Manual

Also see for WV-CF504: Product catalog Specifications Installation guide

Contents

16Perform the settings relating to the motion detectionPerform the settings relating to the motion detection as follows. It is possible to detect only objects that moves to the direction speci-fied in advance or objects that keeps on moving for a certain duration. Up to 4 motions can be simultaneously detected.Follow the procedure below.Step 1Move the cursor to "i-VMD" and press the setting button.→ The "i-VMD SETUP" screen appears.Step 2Move the cursor to "MOTION DET" and press the setting button.→ The "MOTION DET" screen appears.Step 3The setting of the motion detection mode is performed. This unit has 3 types of motion deteciton modes.Detect motion of objectsMove the cursor to "MOTION" and select from the following.ON: Provides an alarm signal when motion is detected.OFF (default): Does not detect motion.Detect objects that move continuously within a specified periodMove the cursor to "LOITERING" and select the duration from the following:When a continuously moving object is detected within a specified period, an alarm signal is issued.OFF (default)/ON (5 s)/ON (10 s)/ON (20 s)/ON (30 s)/ON (40 s)/ON (50 s)/ON (1 min)Detect objects that move into the specified directionMove the cursor to "DIRECTION" and select the direction from the following:An alarm signal will be sent out when an object moves to the specified direction.OFF (default)/ON (c)/ON (c )/ON (a)/ON (a )/ON (d)/ON (d )/ON ([)/ON ([ )Step 4Move the cursor to "AREA" and select an area for which the motion detection is to be set.All the alarm actions selected in step 3 will be applied to this area.ALL (default): All areas will be set as the detection area.SETUP: When the setting button is pressed after selecting "SETUP", up to 2 areas can be set as the detection area. Refer to page18 for how to configure the settings.Step 5Move the cursor to "SENSITIVITY" and press the setting button.→ The "SENSITIVITY" screen appears."SENSITIVITY" screen**SENSITIVITY**(1)SENSITIVITY LOWMIN SIZE OFFRET TOP END**CAMERA SETUP**SCENE1ALC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHBW MODE AUTO1i-VMDRET TOP END"i-VMD SETUP" screen"CAMERA SETUP" screen**i-VMD SETUP**(1)MOTION DETOBJECT DET OFFSCENE CHANGE OFFINDICATOR OFFALARM CONTRET TOP END"MOTION DET" screen**MOTION DET**(1)MOTION OFFLOITERING OFFDIRECTION OFFAREA ALLSENSITIVITYRET TOP END