Panasonic WV-CW504S Operating Instructions Manual

Also see for WV-CF504: Product catalog Specifications Installation guide

Contents

5Basic operationThe description below explains how to operate the setup menu basically.The operations in the setup menu are performed with the operation buttons after calling up the setup menu on the connected videomonitor. Refer to the installation guide for further information about the operation buttons.The operations in the setup menu can also be performed through the system controller (option).Screenshot 1Hold down the setting button for more than 2 simultaneouslyseconds to call up the top screen of the setup menu. Step 1Press the up or down button to move the cursor to "END".Step 2Press the right button to move the cursor to "SETUP", andpress the setting button to change the setup mode from"DISABLE" to "ENABLE".Screenshot 2The setup mode changes to "ENABLE", and the setup menubecomes ready to be set. Step 3Move the cursor to the item to be set, and press the settingbutton.Screenshot 3The selected setup screen in the setup menu appears on thescreen.Note:• If the top screen of the setup menu is called up with theoperation buttons while a camera image is displayed, thesetup mode is always "DISABLE" to prevent operationerrors.To configure the settings in the setup menu, change thesetup mode to "ENABLE".• The cursor is a reversely highlighted part.Step 4Perform the settings for each item.• Selection of setting item:Press the up or down button to move the cursor.• Change of settings:Press the right or left button.• Display of advanced setup screen:Press the setting button when "O" is attached to the tar-get setting item.• Return to previous setup screen:Move the cursor to "RET" and press the setting button.• Return to the top screen:Move the cursor to "TOP" and press the setting button.Step 5To return to the camera image screen, move the cursor to"END" and press the setting button.MODEL WV-CW504CAMERA ID OFFCAMERASYSTEMBACK-FOCUSSPECIALLANGUAGEEND SETUP DISABLEMODEL WV-CW504CAMERA ID OFFCAMERASYSTEMBACK-FOCUSSPECIALLANGUAGEEND SETUP ENABLE**CAMERA SETUP**SCENE1ALC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHBW MODE AUTO1i-VMDRET TOP END