Panasonic WV-CW504S Operating Instructions Manual

Also see for WV-CF504: Product catalog Specifications Installation guide

Contents

17Step 6Set the detection sensitivity and the minimum size of objects detected. Perform the setup while viewing the detection result displayedon the screen.Set the detection sensitivityMove the cursor to "SENSITIVITY" and select one of the following options for the detection sensitivity:LOW (default)/MID/HIGHSet the minimum size of objects detectedMove the cursor to "MIN SIZE" and select the minimum size of objects detected from the following: The size options will be displayedin a green frame in the center of the screen. In "OFF" position, any object will be detected regardless of its size.Perform the setup while viewing the detection result displayed on the screen.OFF (default)/SMALL/MEDIUM/LARGENote:• The detection sensitivity and minimum size selected in this step will be applied to all the alarm actions selected in step 3.• The detection areas set in step 4 will be displayed as a white frame on the "SENSITIVITY" screen.• When a motion is detected, a blue frame appears and changes to a red frame after a given time (approx. 1 second.) on the"SENSITIVITY" screen. In operation, an alarm signal is provided when the frame changes to red.Perform the settings relating to the detection of appearance/disappearance of stationary objectsPerform the settings relating to the detection of appearance/disappearance of stationary objects as follows. Up to 4 appearances/disappearances of stationary objects can be simultaneously detected. However, use of the scene change detection functiondecreases the maximum simultaneous detectable appearances/disappearances of stationary objects to 3.Follow the procedure below.Step 1Move the cursor to "i-VMD" and press the setting button.→ The "i-VMD SETUP" screen appears.Step 2Move the cursor to "OBJECT DET" and press the setting button.→ The "OBJECT DET" screen appears.Step 3Move the cursor to "DURATION TIME" and select the wait time of appearance/disappearance of stationary objects from the following.10 s (default)/20 s/30 s/40 s**CAMERA SETUP**SCENE1ALC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHBW MODE AUTO1i-VMDRET TOP END"i-VMD SETUP" screen "OBJECT" screen "SENSITIVITY" screen"CAMERA SETUP" screen**i-VMD SETUP**(1)MOTION DETOBJECT DET ONSCENE CHANGE OFFINDICATOR OFFALARM CONTRET TOP END**SENSITIVITY**(1)MIN SIZE OFFRET TOP END**OBJECT DET**(1)REMOVAL AND LEFT BEHINDDURATION TIME 10sAREA ALLSENSITIVITYRET TOP END