Panasonic WV-SF138 Installation Manual

Also see for WV-SF138: Features & specifications Operating instructions

Panasonic WV-SF138 Installation Manual Manual pdf 25 page image

25Configuring the camera so that it can be accessed from a PCThe following are descriptions for when the camera with default settings is configured. If you are using fire-wall software on your PC, the Setup Program may not be able to find any cameras on your network.Configure the setting of the camera after temporarily invalidating the firewall software. Contact the networkadministrator or your Internet service provider for information about configuring the settings of the network. Insert the provided CD-ROM into the CD-ROM drive of your PC.• The License Agreement will be displayed. Read the Agreement and choose “I accept the termin the license agreement”, and click [OK].• The launcher window will be displayed. If the launcher window is not displayed, double clickthe “CDLauncher. exe” file on the CD-ROM.Note:• Refer to “Using the CD-ROM” in the Operating Instructions on the provided CD-ROM for furtherinformation about CDLauncher. Click the [Run] button next to [IP Setting Software].“Panasonic IP Setting Software” page will be displayed. Click the [Network Settings] buttonafter selecting the MAC address/IP address of the camera to be configured. Select the camera you want to configure, and click [Access Camera].Note:• When cameras are displayed in [IP Setting Software] screen, click the camera with same MACaddress as the MAC address printed on the camera that you want to configure.Configure the network settings