Panasonic WV-SF138 Installation Manual

Also see for WV-SF138: Features & specifications Operating instructions

Panasonic WV-SF138 Installation Manual Manual pdf 9 page image

9PrecautionsRefer installation work to the dealer.Installation work requires technique and experi-ences. Failure to observe this may cause fire,electric shock, injury, or damage to this product.Be sure to consult the dealer.Stop the operation immediately whensomething is wrong with this product.When smoke goes up from the product, thesmell of smoke comes from the product, or theexterior of the product has deteriorated, contin-ued use will cause a fire or fall of the productresulting in injury, accidents, or damage to theproduct.Turn the power off immediately and contactqualified service personnel for service.Do not attempt to disassemble or modifythis product.Failure to observe this may cause fire or electricshock.Consult the dealer for the repair or inspections.Do not insert any foreign objects.This could permanently damage this product.Turn the power off immediately and contactqualified service personnel for service.Select an installation area that can sup-port the total weight.Selecting an inappropriate installation surfacemay cause this product to fall down or toppleover, resulting in injury.Installation work shall be started after sufficientreinforcement.Periodic inspections shall be conducted.Rust on the metal parts or screws may cause afall of the product resulting in injury or acci-dents.Consult the dealer for the inspections.Do not use this product in an inflammableatmosphere.Failure to observe this may cause an explosionresulting in injury.Avoid installing this product in the loca-tions where salt damage occurs or corro-sive gas is produced.Otherwise, the mounting portions will deterio-rate and accidents such as a fall of the productmay occur.Install this product in a location highenough to avoid people and objects frombumping the product.Failure to observe this may cause a drop result-ing in injury or accidents.Do not strike or give a strong shock to this product.Failure to observe this may cause fire or injury.Shock resistance grade (50J IEC60068-2-75 orequivalent) is applied to this product only whenit is installed correctly as described in theseoperating instructions and appropriate shockresistance treatment is applied.Turn the power off when do wiring of this product.Failure to observe this may cause electricshock. In addition, short circuit or wrong wiringmay cause fire.The exclusively designed mount bracketshall be used.Failure to observe this may cause a drop result-ing in injury or accidents.Use the exclusively designed mount bracket forinstallation.The screws and bolts must be tightened tothe specified torque.Failure to observe this may cause a drop result-ing in injury or accidents.Do not rub the edges of metal parts withyour hand.Failure to observe this may cause injury.Do not touch this product or the connect-ed cables during thunder. (even in the pro-cess of work)Failure to observe this may cause electric shock.