12Do not hang down from this product oruse this product as a pedestal.Failure to observe this may cause injury oraccidents.Do not use this product in an inflammableatmosphere.Failure to observe this may cause an explosionresulting in injury.Avoid installing this product in the loca-tions where corrosive gas is produced.Otherwise, the mounting portions may deterio-rate and thus the product may fall down,resulting in injury or accidents.Do not install this product in a place thatis easily exposed to oil.Otherwise, the mounting portions may deterio-rate and thus the product may fall down,resulting in injury or accidents.Do not damage the power cable and thepower plug.Do not damage, fabricate, twist, stretch, bun-dle, or forcibly bend the power cable. Do notplace heavy objects on it, and keep it awayfrom heat sources.Use of a damaged power cable may causeelectric shock, short circuit, or fire.Consult the dealer for repair.Do not touch the main body during therotating operation.Otherwise, your finger may get caught in therotating unit, thus resulting in injury.Do not install beneath areas where layersof snow could fall.Failure to observe this may cause a drop resulting ininjury or accidents.Do not install this product on a place thatis greatly influenced by wind.Installation in a place where the wind speed is80 m/s {156 knot} (wind speed in the fore posi-tion is 60 m/s {117 knot} or more) or more maycause a fall of the product resulting in injury oraccidents.Never touch the power plug with wet hands.This may result in electric shock.Do not attempt to disassemble or modifythis product.Failure to observe this may cause fire, electricshock, or a drop resulting in injury or accidents.Consult the dealer for the repair or inspections.Do not install or clean the camera, ortouch this product, the power cable or theconnected cables during thunder storms.Failure to observe this may cause electricshock.Be careful when installing this product.Dropping this product on your foot may causeinjury.Do not use this product as a footstool orbench.Failure to observe this may cause injury.Do not rub the edges of metal parts withyour hand.Failure to observe this may cause injury.Do not install this product in a place wherethe temperature can get abnormally high.Parts may deteriorate, resulting in fire.Do not apply excessive force.Otherwise, mounting portions may get dam-aged and fall, resulting in injury or accidents.[Precautions for use]To keep on using with stable performanceDo not use this product in hot and humid con-ditions for a long time. Failure to observe thiscauses component degradation resulting in lifeshortening of this product. Please ensure goodheat dissipation of the installation location andavoid direct heat from a heater or the like.This product has no power switch.This product has no power switch.To cut the power supply off from this product,unplug the power cord or turn the tested PoEinjector OFF. Make sure that the power cord ofthe camera or the tested PoE injector can be