22• BasicPower source * 1: AC100~240 V 50 Hz/60 Hz or the tested PoE injector (60 W)Power consumption *1: AC100~240 V 50 Hz/60 Hz:1.4 A/Approx. 61 WTested PoE injector (60 W) DC 54 V:1 A/Approx. 51 WWhen the extension unit(IR LED unit) is attached:AC100~240 V 50 Hz/60 Hz:1.6 A/Approx. 71 WTested PoE injector (60 W) DC 54 V:1 A/Approx. 51 WOperating environmentAmbient operating temperature:Ambient operating humidity:AC100~240V:–50 °C to +60 °C {–58 °F to 140 °F}(Power On range: –30 °C to +60 °C {–22 °F to 140 °F})When using the tested PoE injector:–30 °C to +60 °C {–22 °F to 140 °F}When using the tested PoE injector and IR LED unit at the same time:–20 °C to +55 °C {–4 °F to 131 °F})* The upper limit value of ambient operating temperature indicatesthe use of WV-SUD638 (natural silver). In cases of products withother body colors, the upper limit value is +55 °C {131 °F}.* When WV-SUD6FRL1 (IR LED unit) is attached, the upper limitvalue of ambient operating temperature is +55 °C {131 °F}.10 % to 100 %Storage environmentStorage temperature:Storage humidity:–30 °C to +70 °C {–22 °F to 158 °F}10 % to 95 % (no condensation)External I/O terminals *2: ALARM IN 1 (DAY/NIGHT IN / TIME ADJUSTMENT IN) (x1)ALARM IN 2 (ALARM OUT) (x1)ALARM IN 3 (AUX OUT) (x1)Relay connection terminal (x1)Line input * 2 : Input impedance: Approx. 2 kΩ (unbalanced)Input level: Approx. –10 dBVAudio output *2: Output impedance: Approx. 600 Ω (unbalanced)Output level: –20 dBVWaterproof * 3: IP66 (IEC60529), Type 4X (UL50), NEMA 4X compliantIP67 (IEC60529)Shock resistance: Compliant with IK10 (IEC 62262) (Except for front glass)Wind resistance: Operational: up to 60 m/s {117 knot} (Except in the case of foreposition)Non-destructive: up to 80 m/s {156 knot} (Except in the case offore position)Dimensions: 220 mm (W) × 450 mm (H) × 266 mm (D){8-21/32 inches (W) × 1ft 5-23/32 inches (H) × 10-15/32 inches (D)}Mass: Approx. 8 kg {17.6 lbs}Specifications