2828Configure the basic settings of the camera [Basic]The basic settings such as camera title, time and date, SD memory card and the logs can be configured on the"Basic" page.The "Basic" page has 3 tabs; the [Basic] tab, the [SD memory card] tab and the [Log] tab.Configure the basic settings [Basic]Click the [Basic] tab on the "Basic" page. (☞ Pages 24 and 25: How to display/operate the setup menu)The settings such as the camera title, time and date, etc. can be configured on this page.[Camera title]Enter the title of the camera. Click the [Set] button afterentering the title of the camera. The entered title will bedisplayed in the "Camera title" field.Available number of characters: 0 - 20 charactersUnavailable characters: " &Default: Varies as follows depending on the model inuse.WV-SW355WV-SW352[Date/time]Enter the current time and date. When "12h" is selectedfor "Time display format", "AM" or "PM" can beselected.Available range: 01/01/2010 00:00:00 - 31/12/203523:59:59Important:• Use an NTP server when the more accurate time &date setting is required for the system operation.(☞ Page 82)[Time display format]Select the time display format from "24h", "12h" and"Off". Enter the current hour reflecting this setting whenentering the current time and date for "Date/time". Tohide time and date, select "Off".Default: 24h[Date/time display format]Select a date/time display format. When "2010/04/0113:10:00" is set for "Date/time" after selecting "24h" for"Date/time display format", time & date will be respec-tively displayed as follows.DD/MM/YYYY: 01/04/2010 13:10:00MM/DD/YYYY: 04/01/2010 13:10:00DD/Mmm/YYYY: 01/Apr/2010 13:10:00YYYY/MM/DD: 2010/04/01 13:10:00Mmm/DD/YYYY: Apr/01/2010 13:10:00Default: DD/MM/YYYY (PAL model)Mmm/DD/YYYY (NTSC model)[Summer time (daylight saving)]Select "In", "Out" or "Auto" to determine whether or notto apply daylight saving time. Configure this setting ifthe summer time (daylight saving time) is applied in thelocation where the camera is in use.In: Applies summer time. An asterisk (*) will be dis-played on the left side of the displayed time anddate.Out: Does not apply summer time.Auto: Applies summer time in accordance with the set-tings for "Start time & date" and "End time & date"(month, week, day of the week, time).Default: Out[NTP/Time zone]When "NTP" is clicked, the [NTP] tab of the "Server"page will be displayed. (☞ Page 82)[Start time & date][End time & date]When "Auto" is selected for "Summer time(daylightsaving)", select the time & date for the start time andthe date time (month, week, day of the week, time).
