41Configure the settings relating to the logs [Log]Click the [Log] tab on the "Basic" page. (☞ Pages 24 and 25: How to display/operate the setup menu)The settings relating to the log list can be configured in this section.■ AlarmSettings for the alarm log list can be performed.[Save logs]Select "On" or "Off" to determine whether to save thealarm logs.On: Alarm logs will be saved.Off: Alarm logs will not be saved.Default: OnNote:• When "H.264" is selected for "Recording format"and when "Manual" or "Schedule" is selected for"Save trigger", alarm logs will not be saved.• When "Recording format" is set to "H.264", "Savelogs" is set to "On" or "Off" depending on the set-ting of "Save trigger".[Name of the destination directory for downloadedimages]Enter the name of the destination directory to whichimages associated with the logs are to be downloaded.For example, enter "C:\alarm" to designate the folder"alarm" under drive C.Available number of characters: 3 - 128 charactersAvailable characters: Alphanumeric characters, theslash (/), the backslash (\), the colon (:) and theunderscore (_).■ Manual/ScheduleConfigure the settings relating to manual saving orschedule saving of the log list.Select "On" or "Off" and designate the destinationfolder in the same manner as for "Alarm".Note:• When "Recording format" is set to "H.264", "Savelogs" is set to "On" or "Off" depending on the set-ting of "Save trigger".• Schedule saving is available only when "H.264" isselected for "Recording format".■ FTP errorPerform the settings for the FTP error log list.Select "On" or "Off" and designate the destinationfolder in the same manner as for "Alarm".Important:• When "Name w/o time&date" is selected for "Filename" on the [FTP img. trans.] tab on the "Network"page, FTP error log and associated images will notbe saved. To save them, select "Name w/time&date". (☞ Page 107)Note:• When "H.264" is selected for "Recording format","FTP error" is unavailable.
