6060Adjust the angular field of view using the extra optical zoomfunctionClick the [Setup >>] button of "Extra optical zoom" on the [Image quality] tab of the "Image/Audio" page. (☞ page54)It is possible to adjust the angular field of view using the extra optical zoom function.: Click this button to adjust the zoom ratio tothe "Wide" side.: Click this button to set the zoom ratio to x1.0.: Click this button to adjust the zoom ratio tothe "Tele" side.Important:• The extra optical zoom function may not be acti-vated on the appropriate position if the setting forthe function is performed after the settings for themask areas (☞ page 59), privacy zone (☞ page 61),VMD area (☞ page 70). To prevent this, perform thesetting for the extra optical zoom function beforeother settings.Configure the focus setting (Focus setup menu)Click the [Setup >>] button of "Focus" on the [Image quality] tab of the "Image/Audio" page. (☞ Page 54)Adjust the focus setting by moving the lens focus to the appropriate position.Manual and auto adjustments are available.The auto focus function also allows users to correct out of focus when changing between color and black & whiteimages.[Auto]The auto focus function starts to automatically adjustfocus based on a subject located in the center of thescreen by clicking the [Execute] button.[Focus]The focus can be adjusted manually.[Near] button: Click this button to adjust the focus tothe "Near" side.[Reset] button: Click this button to reset the focus tothe default.[Far] button: Click this button to adjust the focus to the"Far" side.[Adjusting method]Select the focus adjustment method upon switchingbetween the color mode and the black & white mode.Auto: Adjusts the focus function automatically and cor-rects out of focus when switching between colorand black & white images.Preset: Performs the preset movement to each speci-fied focus position when switching between colorand black & white images. The preset position is thefocus position specified last time, which was auto-matically memorized for each of color images andblack & white images.Fix: Fixes the position after adjusting the focus eitherautomatically or manually.Default: Auto
