The settings relating to SNMP can be configured on this page. It is possible to check the status of the cameraby connecting to the SNMP manager. When using the SNMP function, contact the network administrator.[Community]Enter the community name to be monitored.• Available number of characters: 0 - 32 characters• Default: None (blank)IMPORTANT• When using the SNMP function, it is necessary to enter the community name. When no communityname is entered, the SNMP function will not work.[System name]Enter a system name to be used to manage the camera with the SNMP function.• Available number of characters: 0 - 32 characters• Default: None (blank)[Location]Enter the name of the location where the camera is installed.• Available number of characters: 0 - 32 characters• Default: None (blank)[Contact]Enter the E-mail address or the phone number of the SNMP manager.• Available number of characters: 0 - 255 characters• Default: None (blank)18.6 Configure the settings relating to the FTPperiodic image transmission [FTP img. trans.]Click the [FTP img. trans.] tab on the “Network” page. (®page 46, page 48)The settings relating to the periodic transmission of images to an FTP server can be configured on this page.To transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server inadvance (®page 144). Refer to page 181 for descriptions of how to configure schedules of imagetransmission.IMPORTANT• Depending on the network line speed or the network traffic, images may not be transmitted at the exactdesignated interval or period.Operating Instructions 17918 Configuring the network settings [Network]
