• Default: 128[Blue gain]Adjust the blue color of images.When the cursor is moved in the “+” direction, the blue color will become thicker. When the cursor is movedin the “-” direction, the blue color will be thinner. Click the [Reset] button to reset the color to the default.• Default: 128[DNR]The digital noise reduction function reduces noise automatically under the condition of low illuminance. Selectan effect level “High” or “Low” for the digital noise reduction.• High: High DNR, increases afterimage• Low: Low DNR, reduces afterimage• Default: High[Chroma gain level]Adjusts the chroma level (color density).When the cursor is moved in the “+” direction, the colors will become thicker. When the cursor is moved in the“-” direction, the colors will be thinner. Click the [Reset] button to reset the color to the default.• Default: 128[Aperture level]Adjust the aperture level (outline compensation).Images will be sharper when the cursor is moved in the “+” direction, and will be softer when the cursor ismoved in the “-” direction. Click the [Reset] button to reset the color to the default.• Default: 16[Pedestal level]Adjust the black level of images by moving the cursor.When the cursor is moved to the “+” direction, images will become brighter. When the cursor is moved to the“-” direction, images will be darker. Click the [Reset] button to reset the color to the default.• Default: 128[Close] buttonClick this button to quit the “Image adjust” setup menu.11.4.2 Set mask areasWhen “Off” is selected for “Super Dynamic(SD)” and “Back light compensation (BLC)”, it is possible tocompensate for backlight by masking brighter areas.96 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]
