Position No[Preset ID]Select “On” or “Off” to determine whether to enable or disable the preset ID display. This function can be appliedto each preset position.• On: Displays the preset ID.• Off: Does not display the preset ID.• Default: OffIMPORTANT• When “Preset ID (0-9,A-Z)” or “Preset ID” is configured, it is necessary to click the [Set] button to applythem.Note• When “On” is selected, the entered preset ID will be displayed at the position selected for “OSD” onthe [Basic] tab of the “Basic” page. (®page 55)[Preset ID (0-9,A-Z)]Enter the preset ID to be displayed on images. This function can be applied to each preset position.• Available number of characters: 0 - 20 characters• Available characters: 0-9, A-Z and the following marks. ! " # $ % & ' ( ) * + - , . / ; : = ?• Default: None (blank)Note• The entered preset ID will be displayed next to the preset position number on the pull-down menu.When “On” is selected for “Preset ID”, the preset ID will be displayed on images.[Auto focus]Select “Auto” or “Off” to determine whether to enable or disable the auto focus function after the camera hasmoved to a preset position. This function can be applied to each preset position.• Auto: The auto focus function will be activated after moving to a preset position.• Off: Does not activate the auto focus function after moving to a preset position.• Default: OffNote• When the preset position is set to shoot the following objects, it is recommended to select “Off”, andadjust the focus before registering the preset positions.– An object whose contrast is low– An object whose depth never changes– An object with high luminance such as a spotlight[Dwell time]Select a dwell time (duration the camera stops for at each preset position) for the preset sequence operation.5s/ 10s/ 20s/ 30s• Default: 10s[Super Dynamic]Select “On” or “Off” to determine whether to turn on or off the Super Dynamic function. This function can beapplied to each preset position.• On: The Super Dynamic function will work.• Off: The Super Dynamic function will not work.• Default: Off108 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]
