17.6 Configure the settings relating to the FTPperiodic image transmission [FTP img. trans.]Click the [FTP img. trans.] tab on the “Network” page. (®page 47, page 49)The settings relating to the periodic transmission of images to an FTP server can be configured on this page.To transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server inadvance (®page 157). Refer to page 191 for descriptions of how to configure schedules of imagetransmission.IMPORTANT• Depending on the network line speed or the network traffic, images may not be transmitted at the exactdesignated interval or period.• When “On” is selected for both of the alarm image transmission function and the FTP periodic imagetransmission function, the alarm image transmission function will be given priority over the FTP periodicimage transmission function. For this reason, images may not be transmitted at the exact designatedinterval or period if alarms occur frequently.• Select “FTP error” for “Save trigger” on the [SD memory card] tab when using the FTP periodictransmission function.Note• When “FTP error” is selected for “Save trigger” on the [SD memory card] tab, images that have failedto transmit using the FTP periodic image transmission can be saved automatically on the SD memorycard. (®page 33)FTP periodic image transmission[FTP >>]When “FTP >>” is clicked, the [FTP] tab of the “Server” page will be displayed. (®page 157)[FTP periodic image transmission]Select “On” or “Off” to determine whether or not to transmit images using the FTP periodic image transmissionfunction.When “On” is selected, it is necessary to configure the settings of the FTP server. (®page 157)• Default: Off190 Operating Instructions17 Configuring the network settings [Network]
