10.5.1 How the logs and images are saved depending on thesettings for “Alarm”[Log] tab [SD memory card] tabLogs and associated imagesAlarm: SavelogsSD memorycard Save triggerOn Use Alarm input • Logs: Up to 5,000 logs will be kept. When more than5,000 logs are filed, the older logs will be overwritten bythe newer logs. If “JPEG” is set for “Recording format”when more than 5,000 logs are filed, images associatedwith the old logs are deleted. If “H.264(1)” or “H.264(2)” is set for “Recording format” when more than5,000 logs are filed, the oldest images are overwritten,regardless of their association with the logs.• Images: Will be saved. When the remaining capacity ofthe SD memory card becomes insufficient, the olderimages will be overwritten by the newer images.Other than“Alarm input”• Logs: Up to 5,000 logs will be kept. When more than5,000 logs are filed, the older logs will be overwritten bythe newer logs.• Images: Will not be saved.Not use-• Logs: Up to 1,000 logs will be kept. When more than1,000 logs are filed, the older logs will be overwritten bythe newer logs. In this case, the oldest log is the first tobe overwritten. When the power of the camera is turnedoff, logs will be deleted.• Images: Will not be saved.Off Use Alarm input • Logs: Will not be saved.• Images: Will be saved. When the remaining capacity ofthe SD memory card becomes insufficient, the olderimages will be overwritten by the newer images.*To display images on the SD memory card, it isnecessary to copy them onto the PC first. (®page 68)Other than“Alarm input”• Logs: Will not be saved.• Images: Will not be saved.Not use - • Logs: Will not be saved.• Images: Will not be saved.Note• If “H.264(1)” or “H.264(2)” is selected for “Recording format”, and “Alarm input” is selected for “Savetrigger”, “On” will be set for “Alarm” - “Save logs” on the [Log] tab. In this case, “Off” will be set for“Manual/Schedule” - “Save logs” on the [Log] tab.78 Operating Instructions10 Configure the basic settings of the camera [Basic]
