Panasonic WX-LT350 Operating Instructions Manual
Also see for WX-LT350: Brochure & specsManualUsingIntroductionManual
                                |
22Charging a rechargeable battery1 Turn off all microphones.2 Connect the power cable to the input terminal of the battery charger (WX-LZ150).3 Connect the power plug of the power cable to the AC outlet.4 Connect the DC plug of the charger to the DC input terminal of the microphone.When inserting the DC plug into the DC input terminal, align the triangle mark (D) of theDC plug with that (D) of the microphone.To charge two microphones at the same time, connect one DC plug each to the DC inputterminals. To charge one microphone at a time, leave the free DC plug lying nearby.After connecting the microphone to the charger, the charge indicator (red) indicates thecharging status as follows:ON: Charging.OFF: Charging completed, or no battery installed.Blinking: Indicates one of the following conditions.• A dry cell or deteriorated rechargeable battery is installed. Install a rechargeable bat-tery instead of a dry cell, or a new rechargeable battery.• The temperature of the battery may be out of the acceptable range. Confirm that thetemperature is within the acceptable range.5 When charging is completed, disconnect the power plug from the AC outlet.WX-LT350CHGPWRFBATTSELECTOWNOTHERLINEMUTETo AC outlet2Charge indicator[PWR/MUTE]buttonDC plugPower cable(Plug type differs dependingon the locality.)Power plugDC input terminalBattery ChargerWX-LZ15041 35Input terminal |
manualsdatabase
Your AI-powered manual search engine