24• When replacing the neck strap, turn off the power of the microphone, and make sure thatthe microphone is not connected to the charger.Remove the neck strap from the microphone.1 Hold two portions of one side of strap withyour fingers firmly, and push the portionstoward the center of the clip.2 While pinching the clip to open, pull thestrap out of the claw.Remove the other side of the neck strap in thesame way.When attaching a neck strap to themicrophone, hook each side of thestrap to each claw, and reverse theabove procedure.After the neck strap is attached to the micro-phone, make sure both sides of neck strap arehooked to the claws.Important:• Use only the neck strap that is intended for this microphone.(This neck strap is provided with a safety closure to prevent strangling.)Otherwise, that may result in accidental injury.Replacing the neck strapHold and push.ClipNeck strapPull out.ClawPinch.Neck strapClawClip

Panasonic WX-LT350 Operating Instructions Manual