68. Web-based Access Control (WAC) Commands68368.3. config wac authorization attributes DescriptionThis command is used to configure the acceptance of an authorized configuration.When the authorization is enabled for WAC's RADIUS, the authorized data assignedby the RADUIS server will be accepted if the global authorization network is enabled.When the authorization is enabled for WAC's local, the authorized data assigned bythe local database will be accepted. Formatconfig wac authorization attributes {radius [enable | disable] | local [enable |disable]}(1) Parameters RestrictionsOnly Administrator, Operator and Power-User level users can issue this command. ExampleTo configure the acceptance of an authorized configuration:radius If specified to enable, the authorized data assigned by the RADUIS server will be acceptedif the global authorization network is enabled. The default state is enabled.enable Specify to enable authorized data assigned by the RADIUS server to beaccepted.disable Specify to disable authorized data assigned by the RADIUS server from beingaccepted.local If specified to enable, the authorized data assigned by the local database will be acceptedif the global authorization network is enabled. The default state is enabled.enable Specify to enable authorized data assigned by the local database to beaccepted.disable Specify to disable authorized data assigned by the local database from beingaccepted.Zxxx0:admin#config wac authorization attributes local disableCommand: config wac authorization attributes local disableSuccess.Zxxx0:admin#
