Panasonic ZEQUO 2200 Operating Instructions Manual

Contents

Panasonic ZEQUO 2200 Operating Instructions Manual Manual pdf 94 page image

10. Basic IP Commands9410.Basic IP CommandsIn this chapter, you will configure the IP address settings. IPv6 Link-Local addressIn general, if an IPv6 address is not configured, the link-local address is also notconfigured. When the automatic configuration of link-local address is enabled, thelink-local address is automatically configured even though an IPv6 address is notconfigured, allowing for communications in the local network.For the default gateway settings, refer to the sections in "IP RoutingCommands." IP Setup InterfaceOur free application “ZEQUO assist” provides an easy-to-use user interface tochange the IP address.config ipif [{ipaddress | vlan | state[enable | disable]} bootp | dhcp | ipv6 [ipv6address | state [enable| disable]] | ipv4 state [enable | disable] | ip_directed_broadcast [enable |disable] |dhcpv6_client [ enable | disable]]delete ipif ipv6address enable ipif disable ipif show ipif {}enable ipif_ipv6_link_local_auto disable ipif_ipv6_link_local_auto show ipif_ipv6_link_local_auto {}enable ip_setup_interfacedisable ip_setup_interfaceshow ip_setup_interfaceワヰヵユワヰヵユ