Basic Instructions for the Use of This Product●For internal inspection and/or repair, please contact the shop.●Use commercial power supply from a wall socket, which is close and easilyaccessible to this Switching Hub.●Unplug the power cord when installing or moving this Switching Hub.●Unplug the power cord when cleaning this Switching Hub.●Use this Switching Hub within the specifications. Deviation could lead tomalfunctions.●Do not touch the metal terminal of the RJ45 connector, the modular plugof connected twisted pair cable and serial port, or the metal terminal of theSFP extension slot. Do not place charged objects in the proximity of them.Static electricity could lead to equipment failure.●Do not put the modular plug of the connected twisted pair cable on objectsthat can carry static charge, such as a carpet. Do not place it in the proxim-ity. Static electricity could lead to equipment failure.●Before connecting a console cable to the console port, discharge static elec-tricity, for example by touching metal appliance (do not discharge bytouching this Switching Hub).●Do not put a strong shock, including dropping, to this Switching Hub.Deviation could lead to equipment failure.●Do not store and/or use this Switching Hub in the environment with thecharacteristics listed below.(Store and/or use this Switching Hub in the environment in accordance with thespecification.)- High humidity. Possible spilled liquid (water).- Dusty. Possible static charge (such as carpet).- Under direct sunlight.- Possible condensation. High/low temperature exceeding theenvironment specifications.- Strong vibration and/or strong shock.●Please use this Switching Hub in place where ambient temperature is from0 to 50 degrees C. Failure to meet the above conditions may result in fire,electric shock, breakdown, and/or malfunction. Please take notice becausesuch cases are out of guarantee. Additionally, do not cover the bent hole ofthis Switching Hub.Deviation could lead to high internal temperature, equipment failure and/ormalfunction.●When stacking Switching Hubs, leave a minimum of 20 mm space betweenthem.●Please note that operation will not be guaranteed if any SD card other thanthe separately sold Panasonic SD card is installed into the SD card slot.Format the card with this Switching Hub.9
