- 106 -≥ The Eye-Fi menu only appears when an Eye-Fi card is used.≥ The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due tochanges to the card specification etc.≥ Update the firmware of the Eye-Fi card to the latest one using the software supplied with the Eye-Fi card before use.≥ When the endless memory function of the Eye-Fi card is set to on, the files transferred from thecard may be deleted automatically.≥ The Eye-Fi card may heat up as a result of the files being transferred. Note that the use of anEye-Fi card accelerates the battery drain, so we recommend you use the card in Playback Mode.≥ The Eye-Fi setting can be checked while pausing the recording.≥ If the Eye-Fi card is removed and then reinserted into the unit, set functions related to Eye-Fiagain from the menu.≥ When using the Eye-Fi card, please be sure to unlock the write-protect switch. (l 12)≥ Before deleting the files, please confirm they have been transferred to your PC and uploaded tothe sharing site.≥ Do not use the Eye-Fi card in locations where the use of wireless devices is forbidden, such asinside aircraft etc.≥ Depending on network conditions, the transfer may take some time. Also, if network conditionsdeteriorate, the transfer may be suspended.≥ Files over 2 GB in size cannot be transferred. Such files should first be split to reduce the file size.(l 87)[Eye-Fi TRANSFER] is set to [ON](Transferring in Eye-Fi direct mode)[Eye-Fi TRANSFER] is set to [ON][Eye-Fi TRANSFER] is set to [OFF]
