- 62 -Switch the picture quality and recording format of the motion pictures to record. The recordingformats that can be set change according to [REC FORMAT] setting.≥ When [REC FORMAT] is set to [AVCHD]A Favours image qualityB Favours Recording time≥ When [REC FORMAT] is set to [MP4/iFrame]*1 You can record motion pictures in 1080/50p (1920k1080/50 progressive), the best AVCHDpicture quality for this unit.*2 [1080] and [720] are recording modes suitable for playing back or editing on a PC.*3 [iFrame] is a format suitable for Mac (iMovie etc.). It is recommended for when using a Mac.≥ Please refer to page 11 for details about recordable time using the battery.≥ This function’s default setting is [HG] mode.≥ Please refer to page 133 for details about approximate recordable time.≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded,mosaic-type noise may appear at playback.Detected faces appear with frames.≥ Up to 5 frames are indicated. Larger faces and faces nearer to the centre of the screen takepreference over others.[REC MODE]: [RECORD SETUP] # [REC MODE] # desired setting[PH]/[HA]/[HG]/[HE]:(A B)Set the recording format to 1080/50i.[1080/50p] *1 : Set the recording format to 1080/50p.[1080]*2 : Set the recording format to 1080/50p.[720] *2 : Set the recording format to 720/25p.[iFrame] *3: Set the recording format to iFrame.[FACE FRAMING]: [RECORD SETUP] # [FACE FRAMING] # desired setting[PRIMARY]:Only the prioritised face framing is displayed.[ALL]:All face detection framings are displayed.[OFF]:Cancel the setting.MENUMENU