- 88 -Dividing a scene to partially delete (MP4/iFrame)Divide the MP4/iFrame scenes, and delete unnecessary parts.This divides the recorded scenes in two and deletes the front half or back half.The scenes deleted by dividing cannot be restored.≥ Press the recording/playback button to switch this unit to the Playback Mode, and touchthe play mode select icon. Then, select the MP4/iFrame scene. (l 24)1 Select the menu.2 Touch and play back the scene you want to divide.≥ It is convenient to use Slow-motion Playback and Frame-by-frame Playback. (l 68)3 Touch to set the dividing point.≥ Set the dividing point so there will be 2 seconds or more for thepart for deletion, and 3 seconds or more for the part to be kept.4 Touch the part for deletion ([FRONT] or [BACK]).5 Touch [YES] and confirm (play back) the part for deletion.≥ A confirmation message appears when [NO] is touched. Proceed to Step 7.6 Stop the playback.≥ A confirmation message appears.7 Touch [YES].≥ To continue dividing and deleting other scenes, repeat Steps 2-7.To complete editingTouch [Return].≥ It may not be possible to divide scenes with a short recording time.≥ The actual division may slightly slip off the previously designated dividing point.Protecting scenes/still picturesScenes/still pictures can be protected so that they are not deleted by mistake.(Even if you protect some scenes/still pictures, formatting the media will delete them.)≥ Press the recording/playback button to switch this unit to the Playback Mode.1 Select the menu.* [TRANSFER/PROTECT] is displayed when using the Eye-Fi card that is set as the selectedtransfer setting device in advance on the computer.2 Touch the scene/still picture to be protected.≥ When touched, the scene/still picture is selected and the indication appears on thethumbnail. Touch the scene/still picture again to cancel the operation.≥ Touch [Return] to complete the settings.: [EDIT SCENE] # [SPLIT&DELETE]: [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT] *MENU0h01m30s0h01m30s0h01m30sMENU