4. Maintenance4-34 February 2001 3160-A2-GB21-90Aborting Test PatternsUse the Abort command to stop all test patterns or any selected test pattern activeon the DSU/CSU.ProcedureTo abort test patterns:1. From the top-level menu screen, select Test.2. From the Test screen, select Ptrns.3. From the Patterns screen, select Abort.4. From the Patterns Abort screen, press the desired Function key to abort eitherAll active test patterns, active Send test patterns, or the active Monitor (Mon)test pattern.If you select All, the DSU/CSU terminates all active test patterns and displaysthe message Command Complete. Skip Step 5.NOTE:If you mistakenly choose to abort a test pattern that is not currentlyrunning, a Command Complete message still displays and the testpattern currently active still runs. Use the TStat branch to view the teststatus to determine if the abort was successful.F1 F2 F3Test:Rlpbk Lpbk PtrnsF1 F2 F3Patterns:Abort Send MonF1 F2 F3Patterns: AbortAll Send Mon
