3. Operation3-28 February 2001 3160-A2-GB21-90Configuring a Destination for SNMP TrapsA destination must be configured for each SNMP trap manager specified. Thisconfiguration option is displayed for the number of trap managers specified by theNumber of Trap Managers configuration option.ProcedureTo configure an IP address for the SNMP trap manager:1. From the top-level menu screen, select Cnfig.2. Select the configuration option set to be copied into the Edit area by using theappropriate Function key. Use the scroll keys, if necessary.3. Select Edit.4. From the Edit screen, press the key until the Mgmt selection appears onthe screen.5. Select Mgmt.6. From the Mgmt Config screen, select Trap.7. Press F1 (Next) until the Trapn IP Address configuration option appears.8. Press F2 (Edit) to edit the IP address. You have the option of using F3 (Clear)to reset the IP address to the factory default000.000.000.000. Refer toSettingthe IP Address on page 3-21 for more information on setting an IP address.9. Press F1 (Next) until the Trapn Destination configuration appears, and selectthe destination for the SNMP trap by using the appropriate Function key. Usethe scroll keys, if necessary.F1 F2 F3Edit:User Alarm MgmtF1 F2 F3Mgmt Config:Gen TrapF1 F2 F3Trapn Dst:Next None Com
