Paradyne 3160-A3 Operator's Manual

Contents

Paradyne 3160-A3 Operator's Manual Manual pdf 138 page image

4. Maintenance4-36 February 2001 3160-A2-GB21-905. The following screens alternately appear on the LCD until you press aFunction key to return to the Lamp Test screen. In addition, all LEDs blink.6. When you are satisfied that all LEDs are lighting and the LCD is functioningproperly, abort the Lamp test from the Lamp Test screen. If there is no activityon the DSU/CSU front panel for five minutes, the Device Health and Statusscreen appears automatically. However, the Lamp test remains active until it isaborted.Aborting a Lamp TestProcedureTo abort the Lamp test:1. Display the Lamp Test screen. To do this when the LCD is alternating theLamp test screens, press any Function key. Otherwise, follow Steps 1through 3 for starting a Lamp test.2. From the Lamp Test screen, select Abort.F1 F2 F3❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚F1 F2 F30123456789 : ; < = > ?@ABCDEFGHIJKLMNOF1 F2 F3Lamp Test:Abort StartF1 F2 F3Lamp Test:Abort Start