Paradyne 3160 Operator's Manual

Also see for 3165: Quick installation Release note Operator's guide Quick reference Quick reference

Contents

Paradyne 3160 Operator's Manual Manual pdf 135 page image

Maintenance4-333160-A2-GB21-80 March 1999Monitoring Test PatternsUse the Monitor command to monitor a QRSS test pattern over all the channelson the network interface, or to monitor QRSS or 511 test patterns on the channelsallocated to an individual port.This command provides the number of errors detected in the test pattern (5digits, maximum 99999). ProcedureTo monitor a QRSS or 511 test pattern:1. From the top-level menu screen, select Test.2. From the Test screen, select Ptrns.F1Test:Rlpbk Lpbk PtrnsF2 F33. From the Patterns screen, select Mon.F1Patterns:Abort Send MonF2 F34. From the Patterns Mon screen, press F1 for QRSS or F2 for 511.F1Patterns: MonQRSS 511F2 F35. From the Monitor screen, press the Function key that corresponds to networkor the port for which you want to send a test pattern. Use the scroll keys, ifnecessary. (NET does not appear for the 511 pattern.)F1Monitor:NameNET Prt1 Prt2F2 F3The Monitor screen appears with the error count. If the maximum of 99999 isexceeded, OvrFlw appears instead of the count. If the receiver losessynchronization while the monitor is active, No Sync appears.