Operation3-42 3160-A2-GB21-80March 19994. Line 1 displays the 24 channels for the network interface or the DTEDrop/Insert (DSX-1) interface, depending on which destination was chosen.This example assumes that the network is the destination. Line 2 displayswhat is allocated to the DS0 channel shown in Line 1. Pressing the orkey scrolls the channels onto the screen in groups of three. Select thechannel by pressing the Function key under the desired number. Portnappears. The port is assigned to that channel. To deallocate a port, press theFunction key under that port number. Pressing the Function key underchannels assigned to other ports has no effect.F1N1 N2Next Prt1 Prt2F2 F3Allocating DS0 Channels from the DTE Drop/Insert Interface to theNetwork InterfaceBy using the configuration options, you can allocate DS0 channels from the DTEDrop/Insert (DSX-1) interface to the network interface and specify which DS0channels carry Robbed Bit Signaling (RBS) information for voice channels. ProcedureTo allocate DS0 channels from the DTE Drop/Insert (DSX-1) interface to thenetwork interface:1. From the top-level menu screen, select Cnfig.2. Select the configuration option set to be copied into the Edit area by using theappropriate Function key. Use the scroll keys, if necessary.3. Select Edit.4. From the Edit screen, press the key until the Chan selection appears onthe screen.5. Select Chan.F1Edit:Port NET ChanF2 F3
