COMSPHERE 6800 Series Network Management System2-180 January 1997 6800-A2-GB31-20Manage Call Statistics (mcs)Use the mcs command to specify when the 6800 Series NMS will retrieve call statistics from localCOMSPHERE 3800/3900 Series modems. This may be done up to twice a day. You can also usethis command to turn off call statistics retrieval. In addition, you can specify whether or not calldetail information should be stored.NOTEThemcs command is used globally to specify collection of callstatistics and call detail information. To indicate whether or not thisinformation will be retrieved from a specific device, call statisticsfields in individual 3800 Series modem device profiles can bepopulated appropriately.For most commands, NMS enables you to specify the destination for the command’s results andschedule its execution. If the last page of the input form cannot accommodate the Destination forresults and Schedule execution fields, an additional page is provided. For a complete descriptionof these fields, refer to Chapter 1, Introduction.Access Level: Manager, System AdministratorAbbreviation: mcsRestrictions: NoneRoutine: YesSchedule: YesRelated Commands: Edit Device ProfileManage Call Statistics Input FormThis input form contains the following fields:Store Call Statistics Data (Required field)Specify whether or not call statistics should be retrieved.Valid entries are yes (default) or no. If no is selected, the following message is displayed:Entering no entry in the Store call statistics data field causes the 6800 NMS to stopgathering call statistics.A pop-up menu is available listing valid selections.Daily scheduled update(s)Specify one or two daily time periods at which NMS will begin retrieving call statistics.Valid format is hh:mm (military format only). The default is 01:00.
