IndexIN-4 7984-A2-GB20-10February 1999SNMPenable/disable management, A-16limiting access, 7-4NMS IP Address, A-19NMS Security Options, A-18support overview, 1-5trap options, 6-2trap support, 1-5traps, B-1typical configuration, 1-5start-up, ATI, 2-1status, test messages, 4-6subnet, IP addresses, 8-1switchpacksdefinitions, 3-9location, 3-8S1 definitions, 3-9system, LEDs, 4-13System Options, A-6TTelco-initiatedline loopback, 5-9loopback, enable, A-7payload loopback, 5-10remote line loopback, 5-10remote loopback, enable, A-7Telnet sessionaccess, 7-1access level, A-12enable/disable, A-12inactivity timeout, A-12login required, A-12options, A-11terminalcommunication parameters, 3-3connecting, 3-3terminal port, direct connection, 2-1testaborting, 5-9DTE Loopback, 5-5LED, 4-13, 5-8Line Loopback, 5-3menu, 5-2procedures, 5-1Remote Send Line Loopback, 5-6Repeater Loopback, 5-4Send and Monitor 511, 5-7status messages, 4-6switch setting for Telco loopback, 3-10switch setting for Telco remote loopback, 3-10Telco-initiated, 5-9terminating, 5-9Test Duration, A-6Test Timeout, A-6timeoutCom port session inactivity, A-10Telnet session inactivity, A-12test, A-6traps, SNMP, 6-2, B-1troubleshooting, 6-5DSL performance statistics, 4-8DSX-1 performance statistics, 4-10error statistics, 4-7UUNIX, TFTP server on, 3-13user interface, 3-3async terminal, 2-1how to access, 2-1resetting/restoring access, 7-5Vvirtual function keys, 2-7WwarmStart, B-1weight of unit, D-1
