Configuration Option TablesA-4 7984-A2-GB20-10February 1999DSX-1 Interface OptionsFor DSX-1 Interface Options, refer to Table A-2. To access the DSX-1 InterfaceOptions screen, follow this menu selection sequence:Main Menu →Configuration →Load Configuration From →DSXÎ ÎÎmain/config/DSX–1 HotwireSlot 4 Model: 7984Port 3DSX–1 INTERFACE OPTIONSPort Status: EnableLine Framing: ESFLine Coding: B8BSLine Equalization: 0 -133Excessive Error Rate Threshold: 1E-4Send (AIS) on Network Failure: EnableSend All Ones on DSX-1 Failure: EnablePrimary Clock Source: DSX-1––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Ctrl-a to access these functions, ESC for previous menu MainMenu ExitSaveTable A-2. DSX-1 Interface Options (1 of 2)Port StatusPossible Settings: Enable, DisableDefault Setting: EnableDetermines whether the port can be configured and used.Enable – The port can be configured and used.Disable – The port cannot be configured or used. Configuration fields for the port areinaccessible, no alarms or traps associated with the port are generated, and the LEDassociated with the port is OFF.Line Framing (LTU Only)Possible Settings: ESF, D4Default Setting: ESFSpecifies the framing format to be used by the DSX interface. Line Framing is only available when the standalone unit is configured as an LTU.The NTU is automatically configured to match the framing format used by the LTU.ESF – ESF framing formatting is used for transmitted and received data over the DSX-1Interface.D4 – D4 framing format is used for transmitted and received data over the DSX-1Interface.
