Paradyne HOTWIREt 7984 User Manual

Also see for 7984: Installation instructions User guide Installation instructions

Contents

Paradyne HOTWIREt 7984 User Manual Manual pdf 42 page image

Initial Startup and Configuration3-16 7984-A2-GB20-10February 1999Download CodeThe Download Code screen allows you to download firmware from a TFTPserver. To access the Download Code screen, follow this menu selectionsequence:Main Menu →Control →Download CodeÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎmain/control/download_code HotwireModel: 7984DOWNLOAD CODEImage File Name: ClearTFTP Server IP Address: 000.000.000.000 ClearDestination: DSLStart Transfer: YesPackets Sent: 0000000Packets Received: 0000000Bytes Sent: 0000000Bytes Received: 0000000Transfer Status: Transfer Pending–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Ctrl-a to access these functions, ESC for previous menu MainMenu Exit ProcedureTo download firmware:1. Position the cursor in the Image File Name field. Type the name of the file tobe downloaded.The file name may be a regular path name expression of directory namesseparated by a forward slash (/) ending with the file name. The total pathname length can be up to 128 characters.2. Position the cursor in the TFTP Server IP Address field. Enter the TFTPserver IP address.3. Position the cursor in the Destination field. Use the spacebar to select anetwork destination for the TFTP server. Select DSL if the TFTP serverdestination is the DSL link or COM if the TFTP destination is the COM port.4. Position the cursor at the Start Transfer field. Use the spacebar to select Yes.Press Enter.When the data transfer is complete, the Transfer Status field changes toCompleted successfully.5. Press the Escape key to return to the Control menu. Select Apply Download.6. On the Apply Download screen, select Yes to reset the card and activate thecode.