Paradyne HotWire 7915 User Manual

Also see for HotWire 7915: Connection guide

Contents

Monitoring the Unit6-4 7915-A2-GB20-20September 1997stats→ 1Current 1 minute:SDSL Errors: E1 Errors:FAW – 0 CV – 0CRC – 0 FAS – 0FEBE – 0Previous 1 minute:SDSL Errors: E1 Errors:FAW – 0 CV – 0CRC – 0 FAS – 0FEBE – 0stats→ Performance statistics have a maximum value of 65,536. If the maximumvalue is reached, the statistic resets to zero. Performance statistics are updated every second. E1 Errors (CV and FAS) are only displayed for G.703-compatible units thatare operating in framed mode. Refer to theGlossary for definitions of the types of errors reported.Remote Unit InformationThe same type of information provided for the locally-attached unit (CP or CO)can also be displayed (but not changed) for the unit on the other side of theconnection (CO or CP).From a terminal attached to a CP unit, you can display information about the COunit by using the STUC Menu options. Similarly, from a terminal attached to a COunit, the STUR Menu allows you to display information about the CP unit.To access the STUC (or STUR) Menu, enter 6 at the Command prompt.***** STUC Menu *****1) Board Status2) Performance Monitor3) Board Configuration?) Redisplay this menuQ) QuitSTUC Command→