A. Configuration OptionsA-30 September 2004 7990-A2-GB20-20SNMP Traps OptionsAn SNMP trap can be automatically sent out through the EOC or the Managementport to an SNMP manager when the Hotwire TDM SHDSL endpoint detectsconditions set by the user. Refer to Appendix B, Standards Compliance for SNMPTraps, for details of SNMP traps supported by the endpoint.To access the SNMP Traps Options screen, follow this menu selection sequence:Main Menu→Configuration→Current Configuration→Management and Communication→SNMP Trapsmain/config/management/trapModel: 799xSNMP TRAPS OPTIONSSNMP Traps: EnableNMS 1 IP Address: 135.014.040.001 Clear Destination: DSLNMS 2 IP Address: 135.014.003.027 Clear Destination: DSLNMS 3 IP Address: 135.014.001.008 Clear Destination: DSLNMS 4 IP Address: 135.014.002.024 Clear Destination: DSLNMS 5 IP Address: 204.128.146.035 Clear Destination: DSLGeneral Traps: Both Enterprise Specific Traps: DisableLink Traps: Both Link Traps Interfaces: All-------------------------------------------------------------------------------Ctrl-a to access these functions, ESC for previous menu MainMenu ExitSave
