3. Initial Startup and Configuration3-6 September 2004 7990-A2-GB20-20ProcedureTo change Identity information:1. Position the cursor in the System Name field. Enter a name unique in yournetwork to identify the SNMP managed node (or unit).2. Position the cursor in the System Location field. Enter the physical location ofthe unit.3. Position the cursor in the System Contact field. Enter the name and contactinformation of the person responsible for the unit.4. Press Ctrl-a to switch to the function key and message area below the dottedline.5. Select Save and press Enter.See Viewing Identity Information in Chapter 6, Monitoring and Troubleshooting toview this information once you have entered it.Choosing a Configuration MethodYou can make configuration changes through a VT100-compatible terminal usingthe unit’s Configuration menus or by manually changing switches on the board.The unit is shipped with the switchpacks disabled to allow settings to be madethrough the Configuration menus. To use the switches, see Chapter 4, Configuringthe Unit Using the Internal Switches.
