2. Using the Asynchronous Terminal Interface2-6 May 2002 7990-A2-GB20-00Navigating the ScreensYou can navigate the screens by: Using keyboard keys Using function keys Switching between the two screen work areasKeyboard KeysUse the following keyboard keys to navigate within the screen.Press . . . To . . .Backspace Move cursor to the previous field on the screen.Ctrl-a Move cursor between the screen area and the function key andmessage area below the dotted line at the bottom of the screen.Ctrl-k Tab backwards (move cursor one field to the left).Ctrl-l Redraw the screen display, clearing information typed in but notyet entered.Delete (Del) Delete character that the cursor is on.Down Arrow or Ctrl-d Move cursor down one field within a column on the same screen.Esc Return to the previous screen.Left Arrow or Ctrl-b Move cursor one character to the left if in edit mode.Return (Enter) Accept entry or display valid options on the last row of the screenwhen pressed before entering data or after entering invalid data.Right Arrow or Ctrl-f Move cursor one character to the right if in edit mode.Spacebar Select the next valid value for the field.Tab Move cursor to the next field on the screen.Up Arrow or Ctrl-u Move cursor up one field within a column on the same screen.
