3. Initial Startup and Configuration3-16 May 2002 7990-A2-GB20-00Downloading FirmwareThe Download Code screen allows you to download firmware from a TFTP server.To access the Download Code screen, follow this menu selection sequence:Main Menu →Control →Download CodeProcedureTo download firmware:1. Position the cursor in the Image File Name field. Type the name of the file tobe downloaded.The file name may be a regular path name expression of directory namesseparated by a forward slash (/) ending with the file name (required whenaccessing the MCP FFS). The total path name length can be up to128 characters.2. Position the cursor in the TFTP Server IP Address field. Enter the TFTP serverIP address or the MCP IP address for the MCP FFS.3. Position the cursor in the TFTP Server Destination field. Use the spacebar toselect a network destination for the TFTP server. Select DSL if the TFTPserver destination is the DSL link or COM if the TFTP destination is the COMport (if COM port is set to NetLink, see Table A-7, Communication PortOptions, in Appendix A,Configuration Options).4. Position the cursor in the Immediately Apply Download field. If you would likethe download to be effective immediately, select Yes.main/control/download_codeModel: 799xDOWNLOAD CODEImage File Name: ClearTFTP Server IP Address: 000.000.000.000 ClearTFTP Server Destination: DSLImmediately Apply Download: YesStart Transfer: NoPackets Sent: 0000000Packets Received: 0000000Bytes Sent: 0000000Bytes Received: 0000000Transfer Status: Transfer Pending-------------------------------------------------------------------------------Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
