Paradyne Hotwire 8774 User Manual
Also see for Hotwire 8774: Installation instructionsUser guide
                                                                                                              | |
Contents
|
Initial Startup and Configuration3-78774-A2-GB20-10 December 19983. Position the cursor in the TFTP Transfer Direction field. Use the spacebar toselect Download from Server or Upload to Server.4. Position the cursor in the Destination field. Use the spacebar to select anetwork destination for the TFTP server. Select DSL if the TFTP serverdestination is the DSL link port or IMC (in-band management channel) if theTFTP destination is the Management port of the MCC.5. Position the cursor at the Start Transfer field. Use the spacebar to select Yes.Press Enter.When the data transfer is complete, the Transfer Status field changes toCompleted successfully.6. Position the cursor at the Activate new configuration? field and select Yes toactivate a new downloaded configuration. Press Enter.NOTE:The following options are not changed:— DSL Mode and Telnet Session configuration options— Peer IP addressYou must change these settings with the appropriate configuration menusafter the new configuration is activated. See Table A-1, Network InterfaceOptions, Table A-4, System Options, and Table A-5, Telnet Session Options,in Appendix A,Configuration Option Tables. |
Related manuals for Paradyne Hotwire 8774
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine