Security7-4 8774-A2-GB20-10December 1998Deleting a Login Procedure1. To delete a login record, follow this menu selection sequence:Main Menu →Control →Administer Logins2. Select PgUp or PgDn and press Enter to page through login pages/recordsuntil you find the one to be deleted.3. Once the correct record is displayed, select Delete and press Enter.4. To complete the delete action, select Save and press Enter.When the deletion is complete, Command Complete appears at the bottomof the screen. The number of login pages/records reflects one less record,and the record following the deleted record appears.Controlling SNMP AccessThere are three methods for limiting SNMP access: Disable the SNMP management option. Refer to Table A-7, General SNMPManagement Options. Assign SNMP community names and access types. Limit SNMP access through validation of the IP address of each allowedSNMP manager.Assigning SNMP Community Names and Access TypesThe unit can be managed by an SNMP manager supporting SNMP. Thecommunity name must be supplied by an external SNMP manager accessing anobject in the MIB.To define SNMP community names, follow this menu selection sequence:Main Menu →Configuration →Load Configuration From →Edit →SNMP →General SNMP ManagementRefer to Table A-7, General SNMP Management Options, to: Enable SNMP Management. Assign the SNMP community names of the SNMP Managers that are allowedto access the units Management Information Base (MIB). Specify Read or Read/Write access for each SNMP community name.