4. Monitoring the Unit4-2 February 2001 8700-A2-GB25-10Viewing System and Test StatusTo view System and Test Status information, follow this menu selection sequence:Main Menu→Status→System and Test StatusThe System and Test Status screen has three sections: Health and Status – Displays messages in priority order (highest to lowest).Refer to Table 4-1, Health and Status Messages. Self-Test Results – Results of the Diagnostic test run on the device itself.Refer to Table 4-2, Self-Test Results Messages. Test Status – Currently active tests. Refer to Table 4-3, Test StatusMessages.main/status/system HotwireSlot: 4 Model: 87x5SYSTEM AND TEST STATUS Page 1 of 1HEALTH AND STATUS SELF-TEST RESULTS TEST STATUS-------------------------------------------------------------------------------LOS at Net, Ptn CPU Failed No Test ActiveOOF at Net, Ptn Device Failed LLB Test Active, PtnEER at Net, Ptn Net DSL Failed, Ptn RLB Test Active, PtnSYNC Pt Down, Ptn SYNC Pt Failed, Ptn DTLB Test Active, PtnNet Margin Threshold, Ptn Memory Failed DCLB Test Active, PtnFallback Rate, Ptn Failurexxxxxxxx 511 Test Active, PtnDevice Failedyyyyyyyy Passed Lamp Test ActiveDownload FailedNet Com Link DownMismatch Rate, Ptn-------------------------------------------------------------------------------ESC for previous menu MainMenu Exit
