Introduction 2-1AC30 series Variable Speed InverterChapter 2: IntroductionAbout this ManualWho is this Manual aimed at?This Manual is intended for use by the installer of the AC30 series inverters. It assumes a reasonable level of understanding in this discipline.It is more detailed than the relevant QuickStart manual.There is a separate software reference - HA503711U003 ‘AC30 Series Software Reference Manual’ that is intended for use by the user andprogrammer of the AC30 series inverters.Note: It is important to always pass on this Manual to any new user of the AC30 series inverter.How the Manual is Organised?This Hardware Installation Manual is organised into chapters, indicated by the numbering on the edge of each page. If the manual is to be printedit is designed so that it should be printed double-sided using the short-edge for binding.Information for the following AC30 units is included - Frame K, L, M & N power stacks, and AC30V, AC30P & AC30D control modules which, arecollectively referred to as “the Inverter” or “drive” throughout the manual.Product coding: Any “x” within a product code indicates there are variants, see the ‘Appendix D: AC30 Series Product Codes’ section for moreinformation.Any text placed in a highlighted area as this sample shows, only refers to the AC30P and AC30D control modules.Parker Hannifin Manufacturing Limited is referred to as “Parker” throughout the manual.IMPORTANTPlease read all Safety information before proceeding with the installation and operation of this unit.AC30PAC30D
