F-4 Technical Specifications - Control ModuleAC30 series Variable Speed DriveUSER 24V SUPPLY OUTPUT+24VREF (X12/05)Nominal Open CircuitOutput Voltage 24V (minimum 21V)Rated Output Current 140mA : The total current available is 140mA, either individually or as the sum of all digital outputs and User +24VSupply.AUXILIARY 24V INPUT (AC30V & AC30P ONLY)+24V AUX input (X13/05), 0V AUX input (X13/06)Operating Voltage 24V +10%This is an optional auxiliary power input. It will keep the control module, digital I/O, options and GKP powered whenthe main power is off. It will not power any analog I/O.AC30V: A separate non-earthed SELV supply is required for each drive on which these inputs are used.AC30P: A common non-earthed SELV supply can be used to power more than one control module, by connecting thepositive supply to the terminal +24V AUX input (X13/05) on each drive and connecting the negative supply to thecommon system 0V star-point (to which each drives 0V terminal X12/06 and X13/01 are connected).Current 0.5A minimum supply required, per control moduleThe supply to these inputs should be suitably externally fused at 2A, at each individual drive, to protect the controlmodule and supply wiring.RELAYS (AC30V ONLY)RL1 (X14/01 – X14/02), RL2 (X14/03 – X14/04)These are volt-free relay contactsMaximum Voltage 250V ac or 30V dcProtection against inductive or capacitive loads must be provided externally.Maximum Current 3A resistive load
