Parker Compax3S Installation Manual

Also see for Compax3 Fluid T40: Installation manual Operating instructions Operating instructions Start-up Installation manual

Contents

Parker EME Compax3 device description192-120102 N15 June 2008 333.4.3. Analog / Encoder (plug X11)PINX11ReferenceHigh Density Sub DEncoder SSI1 +24V (output) max. 70mA2 Ain1 -: analog input - (14Bit; max. +/-10V)3 D/A monitor channel 1 (±10V, 8-bit resolution)4 D/A monitor channel 0 (±10V, 8-bit resolution)5 +5V (output for encoder) max. 150mA6 - Input: steps RS422 (5V - level) A/ (Input / simulation) Clock-7 + Input: steps RS422 (5V - level) A (Input / simulation) Clock+8 + Input: direction RS422 (5V - level) B (Input / simulation)9 Ain0 +: analog input + (14Bit; max. +/-10V)10 Ain1 +: analog input + (14Bit; max. +/-10V)11 Ain0 -: analog input - (14Bit; max. +/-10V)12 - Input: direction RS422 (5V - level) B/ (Input / simulation)13 Reserved N/ (Input / simulation) DATA-14 Reserved N (Input / simulation) DATA+15 GNDTechnical data X11 (see page 42)3.4.3.1 Wiring of analog interfacesOutput InputCompax3+/-10V/1mA(max: 3mA)X11/3X11/15332 X11/410nF2.2KΩ10KΩAin+2.2KΩX11/910KΩ10nFAin- X11/112.5VCompax3Please note: with Ain- on earth and Ain+ open,2.02V are read in.Structure image of the internal signal processing of the analog inputsAin1 (X11/10 and X11/2) has the same wiring!3.4.3.2 Connections of the encoder interface10nF+5V121ΩA1KΩ1KΩGNDA B NRS422TransceiverB NCompax3The input connection is available in triple (for A & /A, B & /B, N & /N)