Parker Compax3S Installation Manual

Also see for Compax3 Fluid T40: Installation manual Operating instructions Operating instructions Start-up Installation manual

Contents

Parker EME Introduction192-120102 N15 June 2008 92.3 Packaging, transport, storagePackaging material and transportCaution! The packaging material is inflammable, if it is disposed of improperly by burning,lethal fumes may develop.The packaging material must be kept and reused in the case of a return shipment.Improper or faulty packaging may lead to transport damages.Make sure to transport the drive always in a safe manner and with the aid of suita-ble lifting equipment (Weight (see page 39)). Do never use the electric connectionsfor lifting. Before the transport, a clean, level surface should be prepared to placethe device on. The electric connections may not be damaged when placing thedevice.First device checkup Check the device for signs of transport damages. Verify, if the indications on the Type identification plate (see page 8) corre-spond to your requirements. Check if the consingment is complete.StorageIf you do not wish to mount and install the device immediately, make sure to store itin a dry and clean environment (see page 43). Make sure that the device is notstored near strong heat sources and that no metal chippings can get into the devi-ce.DisposalThis product contains materials that fall under the special disposal regulation from1996, which corresponds to the EC directory 91/689/EEC for dangerous disposalmaterial. We recommend to dispose of the respective materials in accordance withthe respectively valid environmental laws. The following table states the materialssuitable for recycling and the materials which have to be disposed of separately.Material suitable forrecyclingDisposalMetal yes noPlastic materials yes noCircuit boards no yesPlease dispose of the circuit boards according to one of the following methods: Burning at high temperatures (at least 1200°C) in an incineration plant licensedin accordance part A or B of the environmental protection act. Disposal via a technical waste dump which is allowed to take on electrolytic alu-minium condensers. Do under no circumstances dump the circuit boards at a pla-ce near a normal waste dump.