OPERATIONBefore first useRemove packaging, empty the drawer, clean the interior of the oven and the hob.Take out and wash the oven fittings with warm water and a little washing-up liquid.Switch on the ventilation in the room or open a window.Heat the oven (to a temperature of 250℃, for approx. 30 min.), remove any stains andwash carefully; the heating plates of the hob should be heated for around 4 min.without a pan.When heating the oven for the first time, it is normal phenomenon to give off smoke andpeculiar smell. This will disappear about 30 minutes later.How to use the heating plateOPERATION10 11Temperature selection knobThe function knobOven andoperation functionsOven is controlled by the function knob and timer and the temperature selection knob.The level of heat can be adjusted gradually by turning the appropriate knob to the right orleft.Switching on the plate results in a orange signal light on the control panel turning on.An appropriately selected pan saves energy.A pan should have a thick, flat base with a diameter equal to the plate diameter, as in thatcase heat is transferred most efficiently.Caution!Ensure the plate is clean – a soiled zone does not transfer all of the heat.Protect the plate against corrosion.Switch off the plate before a pan is removed.Do not leave pans with prepared dishes based on fats and oils unattended on the switched– on plate; hot fat can spontaneously catch fire.3759 100 00