Philips BDL4211V User Manual

Contents

User Manual BDL4211x172.4.2 SELF-TEST FEATURE CHECK (STFC)Your the LCD monitor when used as a computer display through DVI and/or VGA connectionprovides a self-test feature that allows you to check whether your the LCD monitor is functioningproperly. If your LCD monitor and computer are properly connected but the LCD monitor screenremains dark, run the LCD monitor self-test by performing the following steps:1. Switch off both your computer and the LCD monitor.2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation,remove both Digital (white connector) and the Analog (blue connector) cables from the backof computer.3. Switch on the LCD monitor.The floating 'Philips - self-test Feature Check' dialog box should appear on-screen (against ablack background) if the LCD Monitor cannot sense a video signal and is working correctly.While in self-test mode, the power LED remains green and the self-test pattern will scrollthrough the screen continually.This box also appears during normal system operation if the video cable becomesdisconnected or damaged.4. Switch off your the LCD monitor and reconnect the video cable; then switch on both yourcomputer and the LCD monitor. If your LCD monitor screen remains blank after youperformed the previous procedure, check your video controller and computer system; yourLCD monitor is functioning properly.